The gigaACE networking card from Allen & Heath is the M-DL-GACE-A and is one of several audio networking options that can be fitted to an Allen & Heath dLive I/O Port. It provides a 128x128ch 96kHz gigaACE point-to-point link on Cat5e cable to another dLive mixing system. The CAT5e (or higher) copper links allows a connection up to 109 yards (100m).
Codice prodotto: M-DL-GACE-A
Scheda di rete audio Allen & Heath gigaACE.
Contattaci per
The gigaACE networking card from Allen & Heath is the M-DL-GACE-A and is one of several audio networking options that can be fitted to an Allen & Heath dLive I/O Port. It provides a 128x128ch 96kHz gigaACE point-to-point link on Cat5e cable to another dLive mixing system. The CAT5e (or higher) copper links allows a connection up to 109 yards (100m).
Spedizioni in tutto il Mondo
Spediamo giornalmente tramite corrieri espressi come UPS, FedEx, DHL
Pagamenti Sicuri
Pagamenti sicuri - Paga con tutte le carte di credito o Paypal
Resi facili, Acquista con tranquillità
Se non sei completamente soddisfatto del tuo acquisto, ti aiuteremo con il tuo reso.
Soluzioni Personalizzate
Noi siamo gli esperti. Ecco perché possiamo realizzare le migliori soluzioni per i tuoi progetti.
Assistenza
Crediamo nel dialogo e nelle persone. Per questo ti garantiamo un'assistenza continua
The gigaACE is Allen & Heath’s proprietary protocol for transporting Audio and Control over Ethernet, using standard CAT cables. It allows very low latency and cable redundancy without any audio dropout. gigaACE can also tunnel the dLive TCP/IP control network over the same connection, for example to enable control of either of the two systems by a single laptop.The gigaACE card offers a cost-effective and simple solution for digital split applications, replacing the copper multicore / analogue splitters of the past. In a typical FoH / Monitor configuration, the inputs of a dLive system are sent to a second system where independent trim, processing and mixing is applied. gigaACE is a truly plug ‘n play protocol: no computer is required for the setup of gigaACE connections. Simply plug the cable between any two dLive systems and set the patch and clock settings directly on the mixer.