The gigaACE networking card from Allen & Heath is the M-DL-GACE-A and is one of several audio networking options that can be fitted to an Allen & Heath dLive I/O Port. It provides a 128x128ch 96kHz gigaACE point-to-point link on Cat5e cable to another dLive mixing system. The CAT5e (or higher) copper links allows a connection up to 109 yards (100m).
Reference: M-DL-GACE-A
Allen & Heath gigaACE Audio Networking Card
Contact us to or
The gigaACE networking card from Allen & Heath is the M-DL-GACE-A and is one of several audio networking options that can be fitted to an Allen & Heath dLive I/O Port. It provides a 128x128ch 96kHz gigaACE point-to-point link on Cat5e cable to another dLive mixing system. The CAT5e (or higher) copper links allows a connection up to 109 yards (100m).
Shipments all over the World
We ship daily via the most careful express courier, such as UPS, FedEx, DHL
Secure Payments
Secure Payments - Pay with all Credit Cards or Paypal
Easy Returns, Shop with Confidence
If you are not fully satisfied with your purchase, let us help you with a replacement, or return
Tailor Made Solutions
We are the experts. That’s why we can achieve the best solutions for your projects. Contact us and
Assistance
We believe in dialogue and in people. That’s why we guarantee you continuous assistance
The gigaACE is Allen & Heath’s proprietary protocol for transporting Audio and Control over Ethernet, using standard CAT cables. It allows very low latency and cable redundancy without any audio dropout. gigaACE can also tunnel the dLive TCP/IP control network over the same connection, for example to enable control of either of the two systems by a single laptop.The gigaACE card offers a cost-effective and simple solution for digital split applications, replacing the copper multicore / analogue splitters of the past. In a typical FoH / Monitor configuration, the inputs of a dLive system are sent to a second system where independent trim, processing and mixing is applied. gigaACE is a truly plug ‘n play protocol: no computer is required for the setup of gigaACE connections. Simply plug the cable between any two dLive systems and set the patch and clock settings directly on the mixer.