Panasonic CamBot.control - MasterControl Redundant PS Option for Professional Surveillance

• Input: CamBot.remote - Remote Panel 2 KST
• Output:

• TUNING FLOOR DOLLY
• Motorized Dolly for 250mm interaxis track
• 24V Power supply
• Maximum speed 0.5 m/s(*)
• 2 end blocks with tooth belt clamps
• Cable chain connection to dolly
• Cable chain connection to track
• 12V PTZ power supply with 4 pin XLR connector
• Adapter cable from XLR to Panasonic connector PTZ power supply

• Input: CamBot.control - Tally-Hardware Interface
• Output:

The Fujinon ERD-20A-A02 is a B4 type zoom demand designed to be used in HDTV / Broadcast digital lens control kits, including the MS-11, SS-11, SS-13A. 

• Tally TSL is received via the BC controller by IP
• Tally TSL is displayed in CamBot.remote software
• Tally TSL is displayed in Remote-Panel
• Tally TSL is displayed in Robots

• CamBot Routing - The system relays the active camera, selected in the GUI or the hardware controller, to the broadcasting controller (SWP08).
• This allows the camera control network (RCP, Software Master Setup Unit) to control aperture values and image parameters of the selected camera.
• Ask for supported Routers.

The Fujinon ESM-D52B is a high speed digital zoom servo module for HDTV broadcast lenses. The unit provides additional zoom accuracy through RS-232 based remote controllers. The high degree of consistency obtained using the module can be useful during critical and repeated zoom operations, most commonly used during sports coverage and other live events.

Add remote manual focus and servo zoom control to your Premier Series, Select Series, or Broadcast servo lens with this Digipower Semi-Servo Control Kit from Fujifilm. The kit includes an FMM-6B manual focus module, a CFH-47 focus grip, an ERD-40A-D01 zoom rate demand unit, two communication cables, and two mounting clamps.

The FMM-6B focus module attaches to the lens, and the flexible CFC-12-990 cable connects the focus grip to provide manual focus to the lens. The focus grip can mount onto one of your handles using one of the mounting clamps. The ERD-40A-D01 zoom rate demand unit mounts onto a handle with the other mounting clamp, and it connects to the servo zoom connector on the lens with a 12-pin connector for fine digital servo zoom functionality.

Compatibility: Fujifilm Premier Series, Select Series, and Broadcast lenses

Fujinon MS-X1 (MSX1) Semi Servo Zoom Flexible Focus Kit for LA16SX Lens.